Lockouts

Most users are able to save $$ and install there own lockout hardware using our kits. LIFTek has the largest inventory and lowest prices on hydraulic lockouts. Call LIFTek at 1-888-543-8358 to have your lockout requirements evaluated.

	Hydraulic Lockout Kit Includes valves - quantity as needed. Also includes cable, hardware and installation manual w/ fittings guide. User supplies fittings and hose.
	Air Lockout Kit Air lockouts and single lever control kits are also available for lattice cranes. Call LIFTek to discuss your requirements.

Key Benefits

• Lowest cost lockouts for hydraulic cranes
• Comply with US Army Corp and OSHA (manbasket) requirements
• Qualify for more jobsites
• Damage prevention

Anti-Two Block with motion cut is required by the US Army Corp of Engineers, OSHA (when lifting personnel) and on many other job sites.

Hydraulic lockout valves can be installed by your crane mechanic in about 4 to 8 hours. If a crane has all metal lines, the installation will be more difficult and/or require sections to be replaced with rubber hose.

Typically, 3 to 5 valves are required. A valve is required for each winch, for each independent telescope section and for boom down (unless the winch is mounted on the boom). Multi-speed winches may require 2 valves.

Use 40 GPM valves for 3/4" I.D. or smaller lines and 70 GPM valves for 1.0" I.D. or larger lines. 120 GPM valves are available but are not a stock item. You must specify crane voltage 12V or 24V.

Standard valve prices are given below. (Contact LIFTek for other port sizes or threads). You supply fittings and hose. We supply valves, detailed instructions, fittings reference, wire, crimp terminals and cable ties and technical assistance.

Pricing

Call:     U.S. only  1-888-543-8358   for outside U.S. Call 1-804-378-1535